MBP plante regulierement

Yuca10

New Member
Bonjour à tous,

Depuis 3 jours, mon MBP plante toutes les 10 à 20 min. Il s'éteint et se rallume sur une page blanche avec un point d'interrogation qui clignote. Je dois l'éteindre et ensuite il s'allume a nouveau normalement
le SSD a été changé il y a 2 ou 3 mois a peine.

J'ai un crash dans Console également qui intervient toutes les 10 sec environ

Si quelqu'un peut m'aider. Je vous en remercie d'avance.

Cindy



Voici le rapport d'erreur :

Anonymous UUID: FC608A65-FBBF-2EB5-E3F6-C63CC7737F63

Sat Dec 7 12:25:14 2019

*** Panic Report ***
panic(cpu 1 caller 0xffffff802ed14a90): initproc exited -- exit reason namespace 2 subcode 0xa description: none

Thread 1 crashed

RAX: 0x00007fffe1a153c0, RBX: 0x000070000fbe7380, RCX: 0x0000000000000000, RDX: 0x000070000fbe71f8
RSP: 0x000070000fbe7180, RBP: 0x000070000fbe7220, RSI: 0x0000000000022c85, RDI: 0x000070000fbe7230
R8: 0xffffffff00000000, R9: 0x00000000ffffff00, R10: 0x0000010000000000, R11: 0x0000000000002d00
R12: 0x00007fe194400020, R13: 0x0000000000000000, R14: 0x000070000fbe7358, R15: 0x00007fe194400030
RFL: 0x0000000000010202, RIP: 0x00007fff648ae094, CS: 0x000000000000002b, SS: 0x0000000000000023

Thread 0: 0xffffff803b22a000
0x00007fff649e8022
0x00007fff64869cc0
0x0000000000000000

Thread 1: 0xffffff803c94b590
0x00007fff648ae094
0x00007fff648a0d80
0x00007fff648a3ae1
0x00007fff648a438b
0x00007fff6489fe34
0x00007fff648a0897
0x00007fff648a0d24
0x00007fff648a6177
0x00007fff648f85b1
0x000000010d687c85
0x000000010d6979ec
0x00007fff6485ddb8
0x00007fff64870e81
0x00007fff64860081
0x00007fff6487207a
0x00007fff64865166
0x00007fff64872f0d
0x00007fff64876d21
0x00007fff64baefd2
0x00007fff64baebe9
0x00007fe19455e0c0

Thread 2: 0xffffff803bda5cb8
0x00007fff649e95aa
0x00007fff64870e81
0x00007fff64860081
0x00007fff6487207a
0x00007fff64865166
0x00007fff64872f0d
0x00007fff64876d21
0x00007fff64baefd2
0x00007fff64baebe9
0x0000000000000000

Thread 3: 0xffffff80405756a8
0x00007fff649e7de2
0x000000010d69452c
0x00007fff64873e0e
0x00007fff6485ddb8
0x00007fff64872217
0x00007fff64865166
0x00007fff64872f0d
0x00007fff64876d21
0x00007fff64baefd2
0x00007fff64baebe9
0x0000000000000000

Thread 4: 0xffffff8040572000
0x00007fff649e828a
0x00007fff64baebe9
0x0000000000000000


Mac OS version:
17G9016

Kernel version:
Darwin Kernel Version 17.7.0: Fri Oct 4 23:08:59 PDT 2019; root:xnu-4570.71.57~1/RELEASE_X86_64
Kernel UUID: 957CED9A-DB89-3CA2-9986-9CFD6283B806
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
Root disk errors: "Could not recover SATA HDD after 5 attempts. Terminating."

EOF
Model: MacBookPro8,1, BootROM 87.0.0.0.0, 2 processors, Intel Core i5, 2,3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.102.30)
Bluetooth: Version 6.0.7f16, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 860 QVO 1TB, 1 TB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: USB 2.0 Bus
USB Device: Hub
USB Device: IR Receiver
USB Device: USB 2.0 Bus
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
 
Dernière édition:

Yuca10

New Member
Bonjour,
Le problème principal ne vient pas du fait qu'il démarre sur le point d'interrogation, mais plutôt qu'il plante et redémarre sur le point d'interrogation. Je peux ensuite l'éteindre et le rallumer normalement.
J'ai fait un test AHT approfondi. Aucun problème détecté.
Je cherche la cause du plantage.
Avant de s'éteindre, il fige à plusieurs reprises, et ensuite il redémarre.
J'ai un soft qui test la température, fréquence du CPU, etc ... Il chauffe beaucoup et la fréquence n'est pas stable du tout.
Je viens de tester en mode sans échec. Idem il redémarre.
Si vous avez une Idée. Je suis preneuse
 

Yuca10

New Member
Pouvez-vous effectuer des tests sur le Mac : Tester son MacBook : mémoire, vidéo, disque, batterie, WiFi…
Et, me dire si un code d'erreur matériel s'affiche ? Merci.
Bonjour, j'ai refait un test hardware, aucune erreur. Pas de problème de batterie non plus. J'ai lancé un test rember. Ci dessous le résultat :

Rember Test Results

All tests passed!

Total built-in memory: 4 GB


This is the total amount of physical memory that the computer has installed. If this figure is not showing the correct amount of memory there may be a problem with one or more installed DIMMS.

Available memory: 32 MB

Available memory is the amount of physical memory that is currently not in use by any other processes. All available memory will be used for testing when the "All" option is selected. To increase the amount of available memory, you can restart your computer before testing. If you are familiar with the command line (CLI), you can run memtest (the core of Rember) in single-user mode. See Rember help, or http://www.memtestosx.org for more information.

Requested amount: All MB

The total amount of memory requested for testing by the Rember application. Not all requested memory can be allocated for testing. See information on "Available memory" for more information.

Memory allocated for testing: 32 MB

This is the total amount of memory that memtest was able to allocate for testing. See "Available memory" section for more information.

-------

Loops selected: 1

Total loops selected by user for testing. All loops should complete when testing is successful. Test failure when the "Continue on Error" preference is selected will cancel tests before this number of loops has been completed. Users can also cancel testing before this number is reached.

Loops completed: 1

Total loops completed by memtest. Note that the Rember is not always able to identify how many loops ran. If there are discrepancies between this and the loops selected, the log should be examined to determine exactly how many loops were performed.
-------

Total execution time: All tests passed! Execution time: 12 seconds

This is the total amount of time that it took to execute the selected tests. Execution time may vary from system to system, and is provided as a guide for determining how long users can expect tests to run based on the amount of memory installed on the system.

Testing start time: 2019-12-08 13:04:11 +0000

Testing end time: 2019-12-08 13:04:23 +0000


Rember version: 0.3.7b Memtest version: 4.22
 
Haut